41. | Shifting a register content to left by one bit position is equivalent to |
a. | division by two |
b. | addition by two |
c. | multiplication by two |
d. | subtraction by two |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (c).multiplication by two
|
42. | For JK flip flop with J=1, K=0, the output after clock pulse will be |
a. | 0 |
b. | 1 |
c. | high impedance |
d. | no change |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (b).1
|
43. | The output of SR flip flop when S=1, R=0 is |
a. | 1 |
b. | 0 |
c. | No change |
d. | High impedance |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (a).1
|
44. | The number of flip flops contained in IC 7490 is |
a. | 2 |
b. | 3 |
c. | 4 |
d. | 10 |
View Answer Report Discuss Too Difficult! |
Answer: (a).2
|
45. | How many two-input AND and OR gates are required to realize Y=CD+EF+G |
a. | 2,2 |
b. | 2,3 |
c. | 3,3 |
d. | none of these |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (a).2,2
|
46. | When an input signal A=11001 is applied to a NOT gate serially, its output signal is |
a. | 00111 |
b. | 00110 |
c. | 10101 |
d. | 11001 |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (b).00110
|
47. | The result of adding hexadecimal number A6 to 3A is |
a. | DD |
b. | E0 |
c. | F0 |
d. | EF |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (b).E0
|
48. | A universal logic gate is one, which can be used to generate any logic function. Which of the following is a universal logic gate? |
a. | OR |
b. | AND |
c. | XOR |
d. | NAND |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (d).NAND
|
49. | A full adder logic circuit will have |
a. | Two inputs and one output |
b. | Three inputs and three outputs |
c. | Two inputs and two outputs |
d. | Three inputs and two outputs |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (d).Three inputs and two outputs
|
50. | An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately |
a. | 1 MHz |
b. | 500 MHz |
c. | 2 MHz |
d. | 4 MHz |
View Answer Report Discuss Too Difficult! Search Google |
Answer: (a).1 MHz
|